Pure Energy 4.5K 88ci
$237.95
| Description: |
|
|
The
88 is Pure Energy’s pro level air system. This system combines the
popular Phat bottle and the top-of-the-line Pure Energy Reactor
regulator. The Pure Energy Reactor regulator has a preset output
pressure set between 800-900 PSI. This air system works great with any
marker on the market, from Piranhas to Angels. Because Pure Energy
Reactor regulators are now re-buildable, this system is one of the most
user-friendly, screw-in air systems in paintball. On most markers you
can expect to get 1300-1800 shots from a full fill. The exemption for
Pure Energy’s carbon fiber bottle means you only have to have it
re-hydrotested every five years. With the CFT piston and a streamlined
setup, this air system is both extremely consistent over the
chronograph and has very little drop off as you shoot the gas out of
the tank (life of the fill). These are attributes sometimes found in
much more expensive air systems packaged into a smaller, easier-to-use,
screw-in system. Feature Detail: - 88 cubic inches carbon fiber wrapped bottle
- Consistent Flow Technology piston
- Mil-spec Belleville springs
- Dual safety rupture plugs for both bottle and downstream safety
- Mechanical gauge
- Nickel plated brass bonnet
- Certified fill nipple and dual locking set screws
Method of Operation: Preset screw-in air system Bottle: 88 cubic inches carbon fiber wrapped Power Supply: Compressed air or nitrogen Length: 12 inches Weight: 3.1 pounds |
 |
| Features: |
|
|
Compressed air tank, black rubber fill valve dust cover, yellow thread cap, and rebuild/repair instructions4500 PSICarbon fiber wrapped1 year warranty against manufacturer defectsPure Energy reactor regulator
|
 |
| Product Details: |
|
|
| Package Length:
| 13.4 inches | | Package Width:
| 5.0 inches | | Package Height:
| 4.9 inches | | Package Weight:
| 3.25 pounds |
|
$237.95
Pure Energy 110/4500 N2 Tank Description:
WARNING - This Tank is Huge! If your looking to get the most shots out of a tank of air then this is the tank for you. This is the biggest tank we carry at 110 cubic inches and 4500 psi. This is a carbon fiber five year hydro tank.
Pure Energy 110CI 4500 PSI N2 Tank Features:
- Output pressure is set between 800-900 PSI..
- Consistent Flow Technology piston
- Mil-spec Belleville springs
- Dual safety rupture plugs for both bottle and downstream safety
- Mechanical gauge
- Nickel plated brass bonnet
- Certified fill nipple
- Dual locking set screws
- 5 year hydro test date
Note: Appearance of bottle may vary from picture |
|
| Details |
 |
| |
Quantity in stock |
No items available |
Weight |
6.00 lbs |
| Price: |
$229.99 |
Empire 56ci
$188.95
Features:
Light compact and will give you up to 1000 shots with a full fill. Includes low pressure drop in kit! Output pressure is preset to 850psi. Consistent Flow Technology piston Milspec Belleville springs Dual safety rupture plugs for both bottle and downstream safety Mechanical gauge Nickel plated brass bonnet Certified fill nipple Dual locking set screws 5 year hydro test date
48 cubic inch Aluminum
 |
$62.95
Features:
- Consistent Flow Technology piston
- Mil-spec Belleville springs
- Dual safety rupture plugs for both bottle and downstream safety
- Mechanical gauge
- Nickel plated brass bonnet
- Certified fill nipple and dual locking set screws
- Preset at 800 psi
- Approximately 500 shots per fill
|
72ci 3000
$76.95
Pure Energy Standard Aluminum Air System Features:- Reactor II Regulator sets new industry standard for flow, stable pressure output, and efficiency
- Fully Adjustable Regulator
- Fully Rebuildable Regulator
- Lifetime Limited Warranty on Regulator
- User replaceable Nickel Plated Bonnet provides greater durability
- New V3.0 Fill Nipple provides greater longevity
Using
HPA instead of CO2 allows you to play in more adverse conditions, while
keeping the consistency that you expect form your marker.
This tank does have a TC stamp and is suitable for use in Canada
Guerrilla
Air CO2 Tank
For use in paintball, a
CO2 tank is fairly simple, consisting of an aluminum cylinder
and a pin valve (usually brass). The pin valve depresses when you screw
the CO2 tank in to your paintball gun, allowing a free flow
of unregulated CO2 into the gun (usually about 800psi). Many
guns use a simple valve system to control the gas flow and fire
paintballs, but more and more, paintball guns are being sold with
regulators, to better control the consistency and pressure level of the
gas inside the marker. These CO2 tanks have several safety
features, as well.
Features:
- 1800psi
Burst Disk - If the pressure inside the CO2 tank exceeds
1800psi, a burst disk will safely release all the air out to prevent a
possible rupture. Possible causes would be leaving your tank in direct
sunlight, allowing the gas to expand.
- Excessively strong
aluminum cylinder - These tanks are rated at over 3000psi rupture
ratings. Long before pressure inside the tank could reach a dangerous
level, the 1800psi burst disk will release the pressure out.
- Simply
screw the CO2 tank into your paintball gun, and you're ready
to go
- Note - CO2
tanks are not recommended for electro-pneumatic paintball guns. If you
have questions regarding what tank you should purchase for your
paintball gun, please give Hustle Paintball a call.
9 OZ
 |
Pure Energy CO2 Tank
9 OZ With Reapeater
Aluminum
Pin Valve
5 Year Hydro
Featuring the safest Valves in the Industry.
|
12 oz
 |
Pure Energy CO2 Tank
12 OZ With Repeater
Aluminum
Pin Valve
5 Year Hydro
Featuring the safest Valves in the Industry.
|